KingMa LP-E6 Dummy Battery Decoded LP-E6N Battery Replacement with Type-C for Canon EOS R R6 R7 R5C 90D 6D2 5D Mark II III IV
Description
【Compatibility】 The Type-C cable dummy battery kit for Canon cameras EOS R, EOS R5, EOS R6, EOS 60D, EOS 70D,
EOS 80D, EOS 90D, EOS 5D Mark II, EOS 5D Mark III, EOS 5D Mark IV, EOS 5Ds, EOS 6D, EOS 6D Mark II,
EOS 7D, EOS 7D Mark II, C700, XC10, XC15
Cameras (Tip: only part of the applicable camera models are listed, before purchasing, please check that your camera has a battery cover and is compatible with LP-E6 batteries).
【LP-E6 Dummy Battery】 A practical supply battery replacement for Canon cameras, with this Type-C dummy battery, your camera can get uninterrupted power supply easily, ideal for long time video recording or live streaming, etc.
【Simple and Convenient to Use】 KingMa LP-E6 dummy battery replaces the Canon LP-E6 battery, its Type-C plug can connect to power bank, car power supply adapter, desktop & wall PD/QC charger. (Input: 9V 3A; Output: 8.4V, 2A, If the power cannot be used after a few minutes of use, please check if the camera is set to power saving mode)
【Safer Protection】 with over voltage protection, over heat protection, overcharge and short circuit protection, in order to make your camera work better, please use a high-quality mobile power, it is more suitable for the momentary power demand of the camera shutter.
【24 Hours Friendly Customer Service】 Please be sure to close the battery compartment door, otherwise it may not be able to start the camera. If you have any problems with our product, please read the instructions in detail, or leave us a message, we will provide you with the best solution.
Package: 1 x Fully Decoded LP-E6 Dummy Battery
Tips:
1. Please read the instruction manual of the fake battery box carefully, and find the corresponding installation steps according to the actual situation of your camera.
2. If the camera cannot be turned on, please carefully check whether it is due to improper operation or the power supply used is not suitable.
3. It is recommended not to use a USB-C to USB-A adapter, which may cause the camera battery to not work.
Type-c Port
USB type-C plug can connect to PD power bank, PD car power supply adapter, desktop & wall PD charger.
Adjustable Spring Wire
USB-C spring power cable, input: QC, PD, 9V 2A; output: 8.4V, 2A, providing stable and safe power supply for your camera.
Tips:
1. In order to make your camera work better, please use a high-quality mobile power, mobile power bank is output at 9V 2A to 4A current. When the power is not enough, will not start or can not shoot properly, Please select a larger current of at least 2.4A, DC 3A or more is better.
2. Do not use the computer USB supply for the camera, because most computer USB 2.0 output voltage is 9V,But the current is less than 500mA.
3. Some mobile phone/ tablet USB charger with identification resistance, can not identify the camera, the current can not meet the requirements, it is not recommended.